[-=zds=-]

Короче, не читает Monitor Asset Manager edid из матрицы, только из контролера, пришлось из матрицы вычитывать еепромку. Потом через тот же Monitor Asset Manager открыл вычитанный файл, и вот он оригинальный edid от моей матрицы:

Monitor
Manufacturer............. AUO
Plug and Play ID......... AUO11C2
Data string.............. B089AW01 V1
Serial number............ n/a
Manufacture date......... 2008, ISO week 1
Filter driver............ None
-------------------------
EDID revision............ 1.3
Input signal type........ Digital
Color bit depth.......... Undefined
Display type............. RGB color
Screen size.............. 200 x 110 mm (9,0 in)
Power management......... Not supported
Extension blocs.......... None
-------------------------
DDC/CI................... n/a

Color characteristics
Default color space...... Non-sRGB
Display gamma............ 2,20
Red chromaticity......... Rx 0,573 - Ry 0,339
Green chromaticity....... Gx 0,330 - Gy 0,596
Blue chromaticity........ Bx 0,142 - By 0,103
White point (default).... Wx 0,310 - Wy 0,330
Additional descriptors... None

Timing characteristics
Range limits............. Not available
GTF standard............. Not supported
Additional descriptors... None
Preferred timing......... Yes
Native/preferred timing.. 1024x600p at 60Hz
Modeline............... "1024x600" 50,400 1024 1048 1184 1344 600 603 604 625 -hsync -vsync

Standard timings supported

Report information
Date generated........... 03.03.2014
Software revision........ 2.70.0.989
Data source.............. File
Operating system......... 6.2.9200.2

Raw data
00,FF,FF,FF,FF,FF,FF,00,06,AF,C2,11,00,00,00,00,01 ,12,01,03,80,14,0B,78,0A,FA,56,92,56,54,98,24,
1A,4F,54,00,00,00,01,01,01,01,01,01,01,01,01,01,01 ,01,01,01,01,01,B0,13,00,40,41,58,19,20,18,88,
31,00,C3,71,00,00,00,18,00,00,00,0F,00,00,00,00,00 ,00,00,00,00,00,00,00,00,20,00,00,00,FE,00,41,
55,4F,0A,20,20,20,20,20,20,20,20,20,00,00,00,FE,00 ,42,30,38,39,41,57,30,31,20,56,31,20,0A,00,58