[coucouillu]

Hi,

I just bought a PCM-750T thanks to someone of this forum.

I have played around with it and noticed that the picture wasn't good enough in 800*600 resolution.

I do not know if you have found solution (can't read Russian) but I found that :

1) In PC mode, push OSD button. The OSD menu appears
2) In the bottom, you have 3 pages: [VIDEO] [SYSTEM] [ABOUT]
3) Select [ABOUT]
4) In [ABOUT], you should have:

[1] MODEL No [DAH-700M]
[2] VERSION [ Ver 1.XX ]
[3] BUILD [ XXXX ]
[4] USED TIME [ XXXX ]
[5] VGA CARD [VGA TYPE-A]

5) Click on [VGA TYPE-A]. It should be highlighted in blue
6) Now with CH+ and CH- button (Channel+ and Channel-), you could change the mode in [VGA TYPE-A], [VGA TYPE-B] or [VGA TYPE-C]. Select [VGA TYPE-B] or [VGA TYPE-C] and the click on “SET” in the upper right corner to save settings
7) To finish, exit PC MODE : Push “MODE” button. Go to PC mode again by pressing “MODE” (AV1-> AV2-> CCD-> PC). The resolution should now appears good.

In TYPE-A mode, you will have problems in 800*600 resolution. This mode is factor default. You have to change it.

Please tell if it works for you?

Brice.