[LuCiFer]

собрал я модуль этот для своего планшета на проце RK29. Загрузил. Тыкаю донгл. Фиг вам. В /dev/ ничего нового не создается, dmesg сообщает

<6>[  125.636742] usb 1-1: new high speed USB device number 3 using usb20_otg
<6>[  125.847571] usb 1-1: New USB device found, idVendor=05e1, idProduct=0408
<6>[  125.854298] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
<6>[  125.861565] usb 1-1: Product: USB 2.0 Video Capture Controller
<6>[  125.867611] usb 1-1: Manufacturer: Syntek Semiconductor
<7>[  127.062914] easycap:: select_input: ERROR: failed to set SAA register 0x02 for input 0
<7>[  127.064649] easycap::0adjust_standard: selected standard: PAL_BGHIN
<7>[  127.065033] easycap::0adjust_standard: ERROR: failed to read SAA register 0x0E
<7>[  127.066283] easycap::0adjust_standard: ERROR: failed to set SAA register 0x0E to 0x01 for table 42
<7>[  127.066807] easycap::0adjust_standard: ERROR: failed to read SAA register 0x08 so cannot reset
<7>[  127.067170] easycap::0adjust_standard: ERROR: failed to read SAA register 0x40 so cannot reset
<7>[  127.067659] easycap::0adjust_standard: ERROR: failed to read SAA register 0x5A but continuing
<7>[  127.068284] easycap::0adjust_standard: ERROR: failed to set SAA register 0x5A to 0x07
<7>[  127.068304] easycap::0adjust_format: sought:    640x480,UYVY(0x59565955),1=field,0x00=std mask
<7>[  127.068317] easycap::0adjust_format: sought:    V4L2_FIELD_NONE
<7>[  127.068340] easycap::0adjust_format: actioning: 640x480 PAL_BGHIN_AT_640x480_FMT_UYVY-n
<7>[  127.070034] easycap::0adjust_brightness: WARNING: failed to adjust brightness to 0x7F
<7>[  127.070048] easycap::0newinput: ERROR: adjust_brightness rc = -2
<7>[  127.070060] easycap::0reset: ERROR: newinput(.,-14) rc = 0
<7>[  127.070072] easycap::0easycap_usb_probe: ERROR: reset() rc = -14
<4>[  127.070107] easycap: probe of 1-1:1.0 failed with error -14
<7>[  127.077450] easycap::0easycap_usb_probe: ends successfully for interface 1
<7>[  127.078497] easycap::0easycap_usb_probe: audio hardware is microphone
<7>[  127.078567] easycap:: easycap_alsa_probe: ERROR: no minor
<3>[  127.078578] easycap: easycap_alsa_probe() rc = -19
<3>[  127.078584]

очевидно, что что-то не так... но вот что?

на RockChip RK2918 вообще кто нибудь запускал easycap?